How to Replace a Saab 9-3 Key
The Saab 9-3 has an impressive deal of appeal for drivers. It has a powerful engine and excellent visibility. It has a very high safety rating.
It is nevertheless important to make sure that you have at minimum two keys that work for your vehicle. It is costly to replace a key if you lose it.
How to Replace the Ignition Key in the Saab9-3
If your car's keys won't start in the ignition it is time to replace it. This guide will walk you through how to do it on the Saab 9-3. You will need a replacement key as well as a reprogrammable battery and a new key-fob case.
Most modern Saab models utilize a transponder instead of a traditional key to unlock the car and begin it. The problem with this is that the reprogrammable battery inside the key-fob can wear out and will not hold a charge anymore. This is especially relevant if you use the same key for the lock you have.
The good thing is that the battery is easily replaced by an experienced locksmith. You can also do it yourself if you have the right tools and a bit of patience. The first step is to remove the key-fob off. Insert an open-ended head into the slot that is in the middle of your case. The plastic is very thin and it is susceptible to being damaged.
Once the case is opened then you can prepare the new key by combining the lower part of the old key with the banana and transponder on the new key. This will ensure that the new key is mated to the CIM correctly, which could make all the difference when replacing the sole key for your Saab 9-3.
How to Replace the Ignition Key in a Saab 900
If you don't have two keys, you will have to take off the steering wheel and dashboard to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you can take off all the trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, insert an opening with a screwdriver behind the ignition switch.
The ignition cylinder houses a key lock that could stop the vehicle from starting if key isn't present in the. If your 900's ignition isn't working properly, check the key to determine whether it's inside the lock or snared into the barrel of ignition. It's also recommended to rotate your keys frequently and clean them regularly to ensure that they don't get bent.
Saab cars differ from other cars due to the fact that they do not have traditional keys made of metal. The car instead recognizes the electric signals generated by the key fob via the use of a special microchip.
If you have lost your only working key fob the dealer will charge you the most expensive dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and make it accept new keys, without the need for replacement. saab key replacement near me 'll save 50% off the dealer's cost! This is the SAAB Key PROGRAM. Find out more about it here!
How do you replace the ignition Key in a Saab9-5
The metal part of the classic Saab keys is easy to copy and does not pose a serious threat to theft of vehicles. The electronic portion of the key-fob is equipped with a chip that can recognize the car when the key is put in the ignition switch.
Saab's anti-theft system has relied upon this technology for over 10 years. It's not as efficient as a physical door lock however, it makes the theft of your car a lot harder. Every Saab owner needs to keep an extra Saab key in their car.
The majority of new Saabs come with two keys from the factory, but you can upgrade them at a dealer through a special handheld computer known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 models, that have more modern, newer features that require the use of a key-fob.
The dealer will replace the CIM or TWICE module in these cars if all keys are lost. They'll charge you a high price for doing it. We can however reprogram the EEPROM on your computer to accept new keys, without having to replace the expensive modules.
How to Replace the Ignition Key on the Saab XC90
It could be time to replace your SAAB key fob if you're experiencing difficulty turning the barrel of your lock. The process is simple and you don't have to visit a dealership. You can complete the process at home using a few basic tools.
You'll first need to prepare the new keys. Before you begin, disable the anti-theft by placing blocks underneath the rear wheels and activating your handbrake. Insert the key in the ignition and then turn the key to the "on" position. This will activate the accessories but will not start the engine. Repeat this process 5 times, and then leave the key on the "on" position.
Next, you'll need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are typically extremely affordable. Depending on the model, you can even purchase them without electronics.
To open up the case, insert an flathead screwdriver into the slot located in the middle, and gently work it. After you have split the case, you'll have access to all of the internal electronic components. Use a flathead screwdriver to gently pry out the electronics.